How Do I Replace the Stylus on My AT95E Phono Cartridge?

 

Replacing an ATN95E Stylus

(PLEASE NOTE: to avoid damage, do not touch the needle. Although not shown in the pictures, this process can also be performed with the stylus guard in place. No tools are required to replace the stylus.)

1. Remove the headshell from the turntable. To do so, rotate the headshell locking ring one full turn clockwise, which will release the headshell. Pull the headshell straight off.

Audio-Technica Turntable Stylus

 2. Flip the headshell over and locate the flanges that protrude from either side of the ATN95E’s green body.

Audio-Technica Cartridge

Side View

 

Audio-Technica cartridge for turntables

Straight On View

 

3. Applying light pressure, enough to grab the flanges, pull the stylus off the cartridge as shown in photos below. It may be necessary to gently rock the stylus side to side as you pull. PLEASE NOTE: DO NOT TOUCH THE NEEDLE.

Changing a cartridge

changing an audio-technica cartridge

Changing cartridge on audio-technica turntable

4. To attach the new stylus, simply follow the above instructions in reverse.

Replacing a worn stylus is an important and economical way to keep your turntable operating at its best. We hope you have found these instructions helpful, but if you require further assistance or have questions about any other Audio-Technica product, please feel free to contact our Audio Solutions Department – we’re always glad to help. And be sure to join us next time for another “Question of the Week”!